Connect With Bluetooth Wireless - Motorola XT2163DL User Manual

» Security: Select the type of security you want: WPA3-Personal,
WPA2/WPA3-Personal, WPA2-Personal or None. If prompted, enter a
unique password (8 characters min.) that others will need to access
your Wi-Fi hotspot.
» Hotspot password: Set or change your hotspot password.
Note: To turn off the hotspot automatically and manage allowed devices,
tap Advanced.

Connect with Bluetooth wireless

Turn Bluetooth on
To turn Bluetooth on, swipe the status bar down and touch
hold it to open Bluetooth settings.
Note: Your phone automatically turns on Bluetooth when you connect to
a paired device.
Tip: To extend battery life or stop connections, turn Bluetooth off when
you're not using it.
Connect devices
The first time you connect a Bluetooth device, follow these steps:
1 Make sure the device you are pairing with is in discoverable mode (for
details, refer to the guide that came with the device).
2 Swipe up
3 With Bluetooth turned on, tap a found device to connect it (if
necessary, tap Pair or enter a passkey like 0000). You can tap
rename the device and choose what the device will be used for.
To automatically disconnect or reconnect a device, just turn the device
off or on.
Note: Using a mobile device or accessory while driving may cause
distraction and may be illegal. Always obey the laws and drive safely.
Share files
» Photos or videos: Open the photo or video, then tap
» Contacts: Swipe up
> Bluetooth.
tap
Bluetooth tethering
To share your phone's internet connection via Bluetooth, swipe up
Settings > Network & internet > Hotspot & tethering and tap the
switch to turn on Bluetooth tethering.
Settings > Connected devices > Pair new device.
>
>
Connect, share & sync
Contacts. Touch and hold a contact, then
. Touch and
to
> Bluetooth.
>