Fig. 3 Names Of Parts - Horiba Scientific 6560S-10C Instruction Manual


Names of parts
This product consists of the parts shown in the figure below.
Cable
Electrode connector
(BNC connector)
Liquid junction
When the ion electrode tip is
attached
* Use the protective pipe for protecting the ion electrode tip.
Attaching it for measurements outdoors will protect the ion electrode tip
against damage from gravel or other foreign matters.
If there is no risk of damage, it is not required to attach it.
4
Electrode cap
Internal solution
fill port
Support pipe
Ion selective
membrane

Fig. 3 Names of parts

Internal
solution
chamber
Ion electrode tip
Rubber cap
(to be removed
before use)
Protective cap
Protective pipe *