Advertisement
B
Connecting the external amplifiers and subwoofer
You can connect amplifiers to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
Front speakers
JVC Amplifier
Rear speakers
JVC Amplifier
C
Connecting the external components
You can connect these components as illustrated below.
• All the components, adapters, or signal cords need to be purchased separately.
CAUTION:
Before connecting the external components, make sure that the unit is turned off.
• To use JVC CD changer, Apple iPod or JVC D. player, set the external input setting to "CHANGER" (see page 24 of the INSTRUCTIONS).
• To use other external components via KS-U57 or KS-U58, set the external input setting to "EXT IN" (see page 24 of the INSTRUCTIONS).
CD changer jack
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Other external component
CD changer jack
*
3
Remote lead
*
4
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.
*
5
Signal cord
*
6
Connecting cord supplied for your CD changer
*
7
JVC Bluetooth adapter
*
8
Interface adapter for iPod
*
9
D. player interface adapter
*
10
Line Input Adapter
*
11
AUX Input Adapter
Remote lead (blue with white stripe)
with or without
with or without
4
Y-connector (not supplied for this unit)
To the remote lead of other equipment or automatic antenna if
any
Front speakers
JVC CD changer
External component
External component
External component
External component
3.5 mm stereo mini plug
JVC Amplifier
Subwoofer
or
Apple iPod
or
JVC D. player
or
or
or
Advertisement
