Color System - Haier HLH26BBTV Manual

System Menu

Color System

Usually this should be set in the auto position. However if the color displayed
on the screen are incorrect, you can manually select the correct color system.
Press MENU and then VOL+/- button, till the picture menu shown on the
right will display on the screen.
Press CH+/- buttons to select "Color Sys.", then press the VOL-/+ buttons
to select the correct color system. In general, you can set it as "AUTO".
Skip
After the programs are presetting, you can skip some programs so that to select your favorite channels only.
1. Press CH+/- button or Direct-digit choosing button to select a channel directly.
Press MENU and then use VOL+/- button to select the SYS. Menu
2.
Press CH+/- buttons to select "Skip" item.
3.
4. press VOL-/+ button to set Skip as On.
5. When you are satisfied with your choice, press MENU button to return to
the previous menu or press EXIT button to return to TV viewing.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the channel to
be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set Skip as Off.
Prog.Switch
1
.Press MENU and then use VOL+/- button to select the SYS. Menu
2
. Press CH-/+ button to select Prog.Switch.
3.
Press VOL+/- to enter the submenu, and press the digital button to set the desired
channel number,
Press CH+/- button to Current Prog or To Prog item, and VOL+/- to select the position then press the digital button to set the
exchange channel number, press CH+ button to Switch, then press VOL+ button to confirm.
4
. When you are satisfied with your choice, press MENU button to return to
the previous menu or press EXIT button to return to TV viewing.
Color Sys.
Sound Sys.
Fine Tune
Skip
Channel Type
CATV Type
Auto Scan
Prog. Switch
.
Color Sys.
Sound Sys.
Fine Tune
Skip
Channel Type
CATV Type
Auto Scan
Prog. Switch
.
Current Prog
To Prog
Switch
AUTO
M/N
49.75MHz
Off
CATV
STD
A
B
C
AUTO
M/N
49.75MHz
Off
CATV
STD
A
B
C
000
001
A
B
C