Specification; Troubleshooting - Haier HL32XSL2 Owner's Manual

If you expect to leave your TV dormant for a long time
(such as a vacation), it's a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.

Specification

Product Specification
32" 40" 46"
Resolution
1920X1080 (Dot)
Power
120 V~ , 60 Hz
requirement
Color system
NTSC, ATSC, Clear QAM
External
75 ohm
Antenna
Impedance
1,070,000,000 (1024 steps of each R,
Color
G and B)
Operating
32~104 °F (0~40 °C)
Temperature
Range
Operating Less than 80%
Humidity
Range
Maximum 6561 feet (2000 m)
Elevation
Dimensen (WXDXH) Unit:inches/
MODEL
mm (Including stand)
31.1X8.3 X22.3 inches
32"
791X210X566 mm
38.9X11.0 X27.1 inches
40"
989X280X689 mm
44.1X11.0 X29.9 inches
46"
1122X280X760 mm

Troubleshooting

Troubleshooting
For the sake of time and cost, it is strongly
„
recommended that you check out the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
Universal Remote Control / Maintenance / Specification
assistance.
No picture,
no sound
Blank screen
No sound
Poor sound
No picture
in some
channel
No color
for some
channel
program
(black and
white)
Weight
(pounds/kg)
Spots with
26.2/11.9
some or all
pictures
40.6/18.4
Horizontal/
48.5/22
vertical bars
or picture
shaking
Television
out of
control
Note
Do not leave the television with static picture in
R
Verify if the television is properly plugged.
Verify if the television is properly
supplied power.
Verify if electricity is available.
Verify if correct signals are input.
Press INPUT button to change signal
input to TV input.
Restart the television of power supply
is interrupted.
Press Mute button and verify if Mute
mode is set.
Switch to other channel and verify if
the same problem happens.
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct. Refer
to Page 17 for adjustments.
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and
Manual Scan.
Verify if the same problem exists in
other channels.
Check out of picture and sound
systems.
Refer to relative instructions in the
Manual for color adjust.
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of channel.
Check for local interference such as
an electrical appliance or power tool.
Disconnect the television from power
supply and, 10 seconds later, connect
the television to the power supply.
If the problem still exists, contact
authorized after-sales service for
technical assistance.
Haier LED HDTV EN-36