Advertisement
07
Taking care of your machine
Maintaining your filter
For best results tap out filter after every use and wash periodically
Depress the release button
Grasp the center tab on
to remove the dirt container
the filter and pull out of
the dirt container
24hr
Hold filter under warm
Allow filter to COMPLETELY
running water (max 40° C)
DRY for at least 24 hours
to rinse. DO NOT use soap/
before refitting into the
detergent. Tap excess water
dirt container
out of filter
Maintaining your Microfibre grab pad
40°C MAX
Machine washable at warm temperature (40°C max).
Always use a mild detergent and lay flat to dry completely
before re-using
Important: DO NOT USE BLEACH or FABRIC SOFTENER. For best results, wash the microfibre cloth after every use
Shake and lightly tap the
filter against the bin to
remove dirt
Gently push the dry filter
To refit the dirt container
back into the dirt container
tilt so that the bottom
aligns first, then gently
push until it locks
into place
Clearing a blockage
Switch off and unplug
Depress the release
button to remove the
dirt container
Storage
Use storage hook to hang
After use wrap power cord
Dust & Vac where it can
around cord clips provided
easily be stored
Important: Store in a cool dry area
Taking care of your machine
Check dirt air path is clear of dust and debris above the
dirt container and below the base of Dust & Vac
NOTE
Always switch off and unplug Dust & Vac
before carrying out any maintenance.
Ensure filter is fully dry (at least 24
hours drying time) before refitting into
the dirt container and is replaced every
6 months.
08
Advertisement
