Advertisement
05
Getting started
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Assembling your hard floor cleaner
Push the handle into the
main body until it locks
into place
Slide the frame of your machine into the cleaning pad
pocket one side at a time
NOTE: This machine is not free standing
Plug into mains socket
IMPORTANT: Always support Dust & Vac during use
Depress the power
Use the microfibre pad to pick up fine
button to turn machine
debris like dirt, dust and pet hair. Use
on and off
vacuum to suck up any left over debris
Emptying the Dirt Container
To empty the Dust & Vac
Grasp the center tab on
depress the release button to
the filter and pull out of
remove the dirt container
the dirt container
Gently push the filter into
To refit the dirt container tilt so that the bottom aligns
Xxxxxxxxxxxxx
Xxxxxxxxxxxxx Xxxxxxxxxxxxx Xxxxxxxxxxxxx
the dirt container
first, then gently push until it locks into place
Xxxxxxxxxxxxx
Using your machine
Empty contents from the
container, shake and lightly
tap filter against bin to
remove remaining dirt
06
Advertisement
