Advertisement
Quick Links
Advertisement
Related Manuals for Vax Floormate Trio HF86-FMT-M
Summary of Contents for Vax Floormate Trio HF86-FMT-M
- Page 1 Floormate Trio User Guide HF86-FMT-M Version 1.0...
-
Page 2: Table Of Contents
CONTENTS Contents Machine Overview General Safety Information Operation Maintenance FAQs Other Information... -
Page 3: Machine Overview
MACHINE OVERVIEW Unit Handle ON/OFF switch Handle locking pin(hidden) Carry handle Clean water tank cap Clean water tank Clean water tank release button Recovery tank release button Recovery tank lid and filter Recovery tank Nozzle release clips Nozzle Squeegee Solution trigger(hidden) Upper handle release button Mode selector... -
Page 4: General Safety Information
GENERAL SAFETY INFORMATION FOR HOUSEHOLD USE ONLY. When using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. This Floormate is for use on hard floors only 2. Only use the Floormate indoors and keep the area your cleaning well lit 3. -
Page 5: Operation
OPERATION Please read General Safety Information at the beginning before use. Assembling your steam mop Raise handle to upright To lower handle, press To install brushes rest the machine on the position until it locks handle release button floor. Align the post on the spin brushes into place and fold handle to with the square hole... - Page 6 OPERATION Before you begin cleaning Please remove any large objects or debris prior to using your Floormate Trio. IMPORTANT: Only use Hoover hard floors cleaning solution. Using other solutions may cause excess foaming. Excessive foam will prevent the machine from working effectively. Using other solutions will invalidate the guarantee Filling the clean water tank To remove the clean water Twist tank cap counter...
- Page 7 OPERATION Emptying the recovery tank NOTE: The recovery tank has an automatic shut off to prevent the tank from overflowing. If this is activated, the machine will not pick up and the sound of the motor will change. The recovery tank will need to be emptied To remove recovery tank, Remove recovery tank lid press down on release...
- Page 8 OPERATION Using your machine The machine can also be The mode selector allows you to moved by lifting the machine choose DRY VAC, WASH or WET using the carry handle on PICKUP. For dry debris pick up turn the front the dial to DRY VAC, the brushes will not rotate To wash hard floors turn the...
-
Page 9: Maintenance
MAINTENANCE 40˚C 40˚C The clean water tank contains a washable filter. Clean this filter Rinse under water to remove when suction is low. Pull open the filter lid gently to remove the debris (max. 40°C) and leave filter for cleaning for at least 24 hours or until fully dry before replacing in the machine... - Page 10 MAINTENANCE Cleaning the nozzle Nozzle can be removed Remove nozzle by pulling Remove any debris from for easy cleaning. Slide straight out and rinse under squeegee by wiping with the two nozzle release running water (max. 40°C) a damp cloth latches outwards Cleaning the brushes Push both brush release...
-
Page 11: Faqs
FAQs Why won’t my Floormate switch on? • Check the fuse in the plug. Always replace the fuse in the plug with a 13amp fuse Why won’t my Floormate pick up? • Empty recovery tank, remove any debris from filter. If washing filter allow 24 hours to fully dry before refitting •... -
Page 12: Other Information
Other Information Service & Help If you have queries or concerns about using your Hoover, please visit www.hoover.ae Technical Specification Voltage: 220-240V ~50Hz Wattage: 700W Cord length: 6m (approx) Weight: 7.3 kg (approx) Subject to technical change without notice. EEC Statement of Compliance Manufacturer/EEC importer: Hoover, hereby on our own responsibility, declare that the HF86-FMT-M series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive... - Page 13 NOTES...