Table of Contents
Advertisement
Maintenance and service
9.3 Servicing the charging station
9.3
Servicing the charging station
9.3.1
Cleaning the touch screen
The touch screen is designed for low-maintenance operation. Clean the touch screen
regularly to ensure that the touch screen is in perfect condition.
Electric shock due to water ingress
Water entering the charging station can damage the charging station. If the unit is
damaged, dangerous voltages may be present on the cabinet or exposed components,
which can cause serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a high-pressure cleaner, steam jet or water jet when cleaning the charging
station.
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the touch screen of the charging station.
• Therefore, do not use solvents.
• Also, never use aggressive or abrasive cleaning agents.
Note
Only clean the touch screen when it is switched off
If you clean the touch screen when it is switched on, you can trigger operator errors. This can
unintentionally put the charging station into an undesirable operating state.
• Switch off the touch screen of the charging station before you clean it.
Permitted cleaning agents and tools
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. Mild cleaning
agents are, for example, commercially available glass cleaners or a mixture of water and
vinegar (ratio 5:1).
• Use only soft cleaning cloths.
• Only in exceptional cases should you use sharp-edged tools, such as stove scrapers, to
carefully remove stubborn adhesive residues from the glass.
94
WARNING
WARNING
Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01
SICHARGE D
Advertisement
Table of Contents
