Siemens SICHARGE D 8EM5907-0AA00-1AA7.01 Operating Instructions Manual page 44

Transporting the charging station with a crane
Ensure adequate carrying capacity, depending on the hoisting gear used. Keep an angle of
inclination of 15 to 60° between the chain and the load at the attachment point. We
recommend, for example, a standard harness with 1 m sling chains of grade 8 or higher.
To transport the charging station to the installation site with a crane, proceed as follows:
1. Mount the orderable crane lugs at the four corners of the enclosure frame on the roof.
When using your own crane lugs, ensure that they have an M12 thread that is 25 to 30 mm
long and are suitable for the weight of the charging station.
2. Hook the hoisting gear into the crane lugs.
3. Lift the charging station vertically.
4. Transport the charging station hanging upright to the site.
Figure 4-2
Packaging and accessories
With all packaging types, shock indicators are attached to the charging station as standard.
Suitable crane lugs can be ordered as accessories during the configuration process.
SICHARGE D
Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01
Transporting the charging station with a crane
Transport and storage
4.1 General information
43