GPS FC24-AC Start-Up Checklist
  1. Manuals
  2. Brands
  3. GPS Manuals
  4. Air Ionizer
  5. FC24-AC
  6. Start-up checklist

GPS FC24-AC Start-Up Checklist

Hide thumbs
1
2
3

Advertisement

Table of Contents

GPS Air
Start-up Checklist
Complete 1 Checklist Per Ionizer
EQUIPMENT + INSTALLER DATA

MODEL VERIFICATION

1. Record Manufacturer: GPS
2. Record Model Number: GPS-FC24-AC
3. Record Serial Number of Ionizer:

INSTALLATION DATA

5. Record Name of Installer:
6. Record Date of Installation/Startup:
7. Record Devise ID Unit is Installed In/On:
8. Record Incoming Power Level:
9. Record Voltage Output at GPS-FC24-AC Emitters:
10. Confirm Installation Type:
PTAC
Mini Split
INSTALLATION

MECHANICAL MOUNT | Magnet Installation

Mounting on ferrous surfaces subject to low levels of vibration (if using fasteners, skip to next section)
1. Confirm the included magnets are firmly attached using the provided fasteners
2. Confirm the GPS-FC24-AC is to be installed downstream of all filters in the system
3. Confirm the GPS-FC24-AC is installed such that air passes over the emitters as indicated on the product
4. Confirm that airflow over the emitters is not obscured/restricted - see the IOM for details
5. Confirm the GPS-FC24-AC is secure
™
AHU Blower Inlet
Ceiling Cassette
Other:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FC24-AC and is the answer not in the manual?

Questions and answers

Related Manuals for GPS FC24-AC

Summary of Contents for GPS FC24-AC

  • Page 1 2. Confirm the GPS-FC24-AC is to be installed downstream of all filters in the system 3. Confirm the GPS-FC24-AC is installed such that air passes over the emitters as indicated on the product 4. Confirm that airflow over the emitters is not obscured/restricted - see the IOM for details...
  • Page 2 2. Confirm appropriate fasteners (e.g. self-tapping sheet metal screws) are used to secure the GPS-FC24-AC to the appropriate surface 3. Confirm the GPS-FC24-AC is installed such that air passes over the emitters as indicated on the product 4. Confirm that airflow over the emitters is not obscured/restricted - see the IOM for details ELECTRICAL INSTALLATION 1.
  • Page 3 QR code. Register your products at www.gpsair.com/product-registration By registering your order, the standard limited warranty on eligible products from your purchase is automatically extended to 3 years, at no additional cost. ©2022 GPS Air GPS-056-23-R20-FC24C...

Table of Contents