Related Manuals for GPS GPS-FC48-AC
Summary of Contents for GPS GPS-FC48-AC
- Page 1 GPS-FC48 Installation, Operation & Maintenance Manual ™ NOTICE: This product is to be used only as directed. Read entire manual before use. Do not use unless properly installed.
- Page 2 NOTE: Use Temperature - Maximum Ambient temperature in which unit shall be used: 140 degree F/ 60°C Mechanical Installation 1. Ensure power to the HVAC equipment and the circuit the GPS-FC48-AC will be connected to has been turned off. 2. Find an appropriate location. Verify the carbon fiber emitters have a 2” clearance from wires or other metal objects.
- Page 3 Brown Dry Contacts/BAS terminals 4. Wire in BAS terminals (optional). The GPS-FC48-AC is equipped with dry contacts that are normally open and close when the GPS-FC48-AC is on and has no faults. The contacts are rated up to 250VAC and 1A. Operation CAUTION! NEVER TOUCH BRUSHES WHILE OPERATING, SHOCK MAY OCCUR Once powered and the inline switch is in the on position, the unit initiates an internal check of all systems.
- Page 4 3101 Yorkmont Road • Suite 400 Charlotte, NC 28208 980-279-5622 © 2021 Global Plasma Solutions Inc. • ZERO OZONE EMISSIONS MEASURED OZONE EMISSIONS FROM GPS FC AC DURING USE PHASE DOES NOT EXCEED . PPM AS TESTED BY UL UL.COM/ECV To access a list of applicable patents, please visit www.gpspatents.com...
Need help?
Do you have a question about the GPS-FC48-AC and is the answer not in the manual?
Questions and answers