Mitsubishi Electric MUZ-DW25VF-E1 Service Manual page 53

13-2. MUZ-DW50VF
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws fixing the service panel.
(2) Pull down the service panel and remove it.
(3) Disconnect the power supply and indoor/outdoor con-
necting wire.
(4) Remove the screws fixing the top panel.
(5) Remove the top panel.
(6) Remove the screws fixing the cabinet.
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the screws of the terminal block support and
the back panel.
(10) Remove the back panel.
Photo 2
Screw of the cabinet
Screws of the cabinet
OBH906A
Photo 1
Screws of the top panel
Screws of the cabinet
Photo 3
Screws of the terminal block support and the back panel
Direction to
remove
Hooks of
the service
panel
53
PHOTOS/FIGURES
Screws of
the back panel
Screws of
the top panel
Back panel
Screw of
the service
panel
Service panel