OPENING the backrest
Open the backrest by pulling on both its sides.
•
Keep pulling until the locking mechanism clicks.
•
Make sure both mechanisms are locked.
•
Try to lower the backrest without touching the levers
•
to be sure it is locked before sitting on the
wheelchair.
Armrests should be removed before folding the
backrest.
2.3 Inserting / removing the armrests
"L" shaped armrest is the only removable armrest available for QPX wheelchairs.
It's revolving and removable and, depending on the setup, height adjustable.
INSERTING
Place the lower part of the armrest onto its correct lodging
•
Make sure it is facing the right way and check the correct placement by verifying
•
its stability.
REMOVAL
When removing the armrest must be revolved backwards (even if partially)
•
before it is removed from its lodging.
The armrest is not fundamental for the correct functioning of the wheelchair and
•
can be removed while the user is sitting on the wheelchair.
Armrests should never be used to lift the wheelchairs, be it with or without
the user.
Armrests should be removed before folding the backrest.
8