Subscribe to Our Youtube Channel
Related Manuals for Ultra electronics HyperSpike MA Series
Summary of Contents for Ultra electronics HyperSpike MA Series
- Page 1 ® HyperSpike Mass Notification MA series ® HyperSpike Mass Notification MA-1 Operations Manual...
-
Page 2: Table Of Contents
® HyperSpike Mass Notification MA-1 Table of Contents Precautions ..........................4 Safety ............................ 4 Handling ..........................4 Product Description ....................... 5 Product Features ........................5 Setup and Operations ......................6 MP3 Player and Microphone Operations ................9 Troubleshooting ........................10 Maintenance ........................ - Page 3 ® HyperSpike Mass Notification MA-1 PRECAUTIONS Hyperspike MA series is powered by 120VAC. Life threatening shock can occur with improper use. ALWAYS • Read all instructions before using the device. • Read and follow the specific PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE ACOUSTIC ENERGY.
-
Page 4: Precautions
® HyperSpike Mass Notification MA-1 Precautions At one meter, the MA Systems can exceed OSHA noise hazard levels • MA-1 IS CAPABLE OF 138 dB AT ONE METER SOUND PRESSURE LEVEL (SPL) • MA-2 IS CAPABLE OF 144 dB AT ONE METER SOUND PRESSURE LEVEL (SPL) •... -
Page 5: Product Description
® HyperSpike Mass Notification MA-1 Product Description ® The HyperSpike MA series of products are long range omni-directional acoustic communication systems designed for military and civil mass notification applications. Base systems include the following components: 1) MA Acoustical Transducer 2) Control Electronics 3) 50’... -
Page 6: Setup And Operations
® HyperSpike Mass Notification MA-1 Setup and Operations Before setting up the unit, check to ensure all parts are included in the shipping container. Before setting up the MA: • Do not defeat any electrical safety features • Always use a properly grounded plug •... - Page 7 ® HyperSpike Mass Notification MA-1 Set Power Switch to OFF and VOLUME CONTROL to low (knob is turned counter clockwise). Connect the AC power cord, and the Microphone cable and/or the Audio Line input cable to the Electronics Control module. Each cable has a different size canon plug connector and it will only connect to its respective connector on the Electronics Control module.
- Page 8 ® HyperSpike Mass Notification MA-1 Typical Transducer installation is shown in Figure 3. • Do not operate in closed areas where reflections could be dangerous • Ensure mast is sized correctly to support Transducer weight and wind loading effects • Tie down Speaker cable to minimize wear and damage •...
-
Page 9: Mp3 Player And Microphone Operations
® HyperSpike Mass Notification MA-1 MP3 Player and Microphone Operations 1. When using the MP3 Player or Microphone, ensure that the MA is pointed away from reflective surfaces. 2. The Line input has a 1/8 inch audio plug that is used to connect the MP3 players. 3. -
Page 10: Troubleshooting
® HyperSpike Mass Notification MA-1 Troubleshooting No output 1. Ensure that Power Switch is ON. 2. Ensure that 100 – 250 VAC is present at the outlet. 3. Ensure that Volume Control knob is above minimum. If there is still no output, check all input cables and canon plugs for nicks, cuts, crimps, or tears. -
Page 11: Maintenance
® HyperSpike Mass Notification MA-1 Maintenance The MA System is a multi-environment device. As such, the MA System should receive maintenance based on where it is being used. The following preventive maintenance actions are the minimum recommended preventive maintenance actions needed: CAUTION: MAKE SURE POWER IS SECURED BEFORE PERFORMING SCHEDULED MAINTENANCE Always inspect MA system before applying power. -
Page 12: Acoustical Properties With Wind
® HyperSpike Mass Notification MA-1 Acoustical Properties with Wind Acoustical properties such as distance and direction are affected by wind direction and wind speed. Since the MA acoustic field is radial, any wind effect will diminish the range into the direction of the wind but extend the range of the system in the downwind side creating an asymmetrical coverage field. -
Page 13: Transducer Specifications
® HyperSpike Mass Notification MA-1 Transducer Specifications MA-1 MA-2 MA-3 Weight 48 lbs (21.8 kg) 98 lbs (44.5 kg) 220 lbs (99.8 kg) 21.5" x 12.4" x 12.4" 40.5" x 12.4" x 12.4" 86" x 12.4" x 12.4" Size (H x W x D) 54.6 x 31.5 x 31.5 cm 102.9 x 31.5 x 31.5 cm 218.5 x 31.5 x 31.5 cm... -
Page 14: Environmental Specifications
® HyperSpike Mass Notification MA-1 Environmental Specifications Environmental MA Series Random Vibration MIL-STD-810F, Method 514.4 Shipboard Vibration MIL-STD-167-1A Shipboard Shock MIL-S-901D, Class I SRS Shock MIL-STD-810F, Method 516.5 (Functional Shock) High/Low Temperature Operation MIL-STD-810F, Method 501.4 & 502.4 Rain MIL-STD-810F, Method 506.4, Blowing Rain Operating Humidity MIL-STD-810F, Method 507.4 Salt Fog... -
Page 15: Contact Information
Mass Notification MA-1 Contact Information For information, RMA’s or questions regarding the HyperSpike MA Mass Notification System, please contact Customer Service at: Ultra Electronics - USSI 4868 E. Park 30 Drive Columbia City, IN 46725 USA ph. 260.248.3666 fax 260.248.3510 www.ultra-hyperspike.com... -
Page 16: Limited Warranty
Mass Notification MA-1 Limited Warranty Ultra Electronics – USSI warrants its products to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty is extended to the original purchaser and all subsequent owners, provided a copy of the original dated bill of sale is presented when service is requested under warranty. - Page 17 (1) year from the date of original purchase from Ultra Electronics - USSI. Exclusion of certain damages Ultra Electronics’ liability is limited to the repair or replacement, at our option, of any defective product, and shall in no event include incidentally or consequential commercial damages of any kind.
Need help?
Do you have a question about the HyperSpike MA Series and is the answer not in the manual?
Questions and answers