Eden Cozy Arbor Bench Assembly Instructions

A S S E M B LY I N S T R U C T I O N S
The Cozy Arbor Bench
Designed to be Installed with the Monaco, Vienna and Florence Arbors
Please read through before starting assembly.

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. End Closure Caps (for Bench Supporting Arms) (4)
2. Bench Supporting Arms (2)
3. Bench Slats (4)
4. Bench Supporting Slat (1)
5. Hardware (in plastic bag)
a) 1/2" x 5 1/2" Galvanized Steel Hollow Dowels (8)
b) 3/8" Dia x 6" Long Galvanized Carriage Bolts (8)
c) 3/8" Galvanized Locking Washers (8)
d) 3/8" Galvanized Nuts (8)
e) 1 1/2" Self-Auguring Stainless Steel Screws (12)
f ) 1/2" Drill Bit (1)

Tools You Will Need

• Cordless Drill
• Hammer
• Level

General Information

• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4'x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.
(Purchase Separately)
3.5
24
1
2
3
4
5 a
www.edenarbors.com
42
2
1/2"
c e
d f
b
Not to Scale
Ver 1/Nov 2008
1