Louver Control; Vertical Airflow Direction Louver Control; Horizontal Airflow Direction Louver Control - Fujitsu ASYG09KHCA Service Manual

4. Louver control

4-1. Vertical airflow direction louver control

Each time the button is pressed, the air direction range will change as below:
• Remote controller display is not changed.
• Vertical airflow direction is set automatically as shown, in accordance with the type of operation
selected.
Cooling / Dry mode
Heating mode
• During AUTO operation, for the first a few minutes after beginning operation, airflow will be hori-
zontal 1; the air direction cannot be adjusted during this period.
The airflow direction setting will temporarily become 1 when the temperature of the airflow is low at
the start of the Heating mode.
• After beginning of AUTO/HEAT mode operated and automatic defrosting operation, the airflow will
be horizontal 1. However, the airflow direction cannot be adjusted at beginning AUTO operation
mode.

4-2. Horizontal airflow direction louver control

Each time the button is pressed, the air direction range will change as below:
Remote controller display is not changed.
4-1. Vertical airflow direction louver control
Side view
1
2
3
4
5
6
7 8
1 2 3 4
: Horizontal flow 1
: Downward flow 7
Front view
1
2
3
1 2 3
- (04-15) -
5 6 7 8
5
4
4 5
4. Louver control