LE100/LE200
USER GUIDE
Grille removal and replacement
Grilles on LE Series monitors are designed to be easy to remove to facilitate driver rotation. No
screws are used to hold them in place; they are manufactured with a natural spring which holds
them in place in slots in each side of the cabinets. The grilles have two or three gaps in the sides
into which an appropriately-sized flat-bladed screwdriver can be inserted to assist in removal.
Insert the screwdriver blade into one of the gaps - either at the top or bottom of the cabinet
(don't start in the middle).
Push the handle down. This will lift the grille out of the slot.
LE100/LE200 User Guide V1.0
14