Martin Audio LE Series User Manual page 15

LE100/LE200
Now lift the handle up; this will ease the grille forward slightly to prevent the return on the grille
dropping straight back into the slot:
Repeat this process for the remaining gaps in the grille to ease it out of the slot all the way up
one side of the cabinet; when you get to the final gap the grill should pop out and away from the
front of the cabinet.
To replace the grille, first insert one side into the slot on one side of the cabinet. Make sure the
return on the grille is completely engaged in the slot. Push on the front of the grille with the flat
of your hand, which will encourage the other edge of the grille to locate on the side of the cabinet
close to the slot. Now push the edge of the grille back starting at the top or the bottom to engage
the return in the slot; you may need to do this a little at a time, working down the length of the
grille until it pops into place.
LE100/LE200 User Guide V1.0
USER GUIDE
15