Table of Contents
Advertisement
SERVICE
Oil
Screws and bolts
Moving parts
TROUBLESHOOTING
Ram does not move
forward
The ram behaves
differently when
extending and reversing
The machine does
not start
The machine is not able
to drive the ram forward
20
INTERVAL
•
Change after the first 10 hours.
•
Thereafter every 50 hours or once
per year.
Oil quantity - see technical data, page 3
•
Regularly, preferably before
each use
•
After each use
LIKELY CAUSE
•
No pressure in the system.
•
Engine runs in the wrong
direction.
•
Dirt, sawdust and sap have built
up in the groove during use.
•
Fault in power supply.
•
The power glove is not correctly
connected.
•
No pressure in the system.
MEASURE
Oil change
•
Use hydraulic oil SHS 32 or SHS 46.
•
The tank is emptied by removing the plug
under the tank.
•
Refilling is done via the refill plug on the
top side.
•
Check and retighten all bolts and screws
•
Grease moving parts regularly.
MEASURE
•
Check oil level.
•
Check engine's direction of rotation.
•
Check and clean the groove regularly.
•
See illustrations and instructions
on page 21.
•
Check the tension.
•
Connect the power glove correctly.
•
Check for leakage
•
Check that all hoses and couplings are
intact.
Table of Contents
Advertisement
Table of Contents
