Haier HLF11PC User Manual page 11

English
3. Press "Dryness Level" button to select a suitable drying time
• After powering on, the clothes dryer automatically sets dryness at "More
Dry." If other drying time is desired, press "Dryness Level" button to select a
shorter time.
4. Press "Temp" button to set a suitable drying temperature
• After switching on, the dryer sets corresponding temperature adapting to dif-
ferent program selected. If other drying temperature is required, press "Temp"
button to enable such a selection.
5. Press "Cycle Signal" button, you will be reminded up upon end of a cycle.
• After switching on, the dryer automatically sets a buzzer at "Softer," while the
user may choose from three prompt sound conditions "Louder," "Softer" and
"Off."
6. Press "Delay Start" button to select a suitable delay drying program
• When "Delay Start" is enabled, your selected program indicator turns off
while "Delay Start" indicator and remaining delay time indication turn on.
During delay period, pressing "Delay Start" button can indicate delay status.
• To change operating program or cancel delay, you should power off the dryer
and re-select.
7. Press "Wrinkle Care" button to select wrinkle-proof drying mode
• Wrinkle Care automatically sets "Off" upon powering on. Press "Wrinkle
Care" button, it sets wrinkle care drying mode.
Note: "Wrinkle Care" function is provided to match "Delay Start" pro-
8. Press "Start/Pause" button
• If starting the machine, first close the front door and then press this button.
• If pause is needed during machine operating, press this button. Pressing
again will resume operation.
9
gram. When a "Delay Start" drying cycle ends, clothes remained
in hot drum is prone to creasing. "Wrinkle Care" function oper-
ates in tumbling clothes by intermittently rotating drum to avoid
clothes wrinkling.