Haier HLF11PC User Manual page 10

• Various button initial status for "Normal program."
Cycle Signal
Wrinkle Care
Cycles
Digital Display Indicate current program remaining time
Temp
Dryness Level More Dry
Timed/Cycles
2. Press "Cycles" button to select a suitable full automatic cycle
• The Normal program will be automatically selected after powering the unit
"ON". If other full automatic program is desired, press "Cycle" button until
corresponding indicator turns on.
• To select your desired settings the "Customized" function should be chosen.
• It can memorize programs defined by user and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Cycles" until "Customized" status, then set
"Timed/Cycles" to Timed Dry or Rack Dry, and set status of other buttons.
Press "Start/Pause" button or after half a minute, the program defined by user
will be stored and will be directly displayed upon next use.
Note: Pressing "Dryness Level" button will be inactive during use of
"Customized" function.
Softer
Off
Normal
High
Auto Program
English
8