Maintenance - Haier WQP6-3 User Manual

Maintenance

Maintenance
Regular inspection and maintenance of your appliance helps
to prevent problems from occurring. This saves time and
aggravation. You should therefore carefully inspect the inside
of your dishwasher from time to time.
Overall condition of appliance
- Check that no grease or scale has accumulated on the in-
side of the dishwasher.
If you discover any deposits:
- Clean the interior of the dishwasher thoroughly with a deter-
gent solution.
Dishwasher salt
Check the LOW SALT Indicator 3 . Top up with salt, If required.
Filters
The filters 11 prevent larger remnants of food or other ob-
jects from getting inside the pump. This residue can occasion-
ally clog up the filters.
The filter system consists of a coarse/microfilter and a flat fine
filter.
- Inspect the filters for obstructions every time the dishwasher
has been used.
- Remove the filters if necessary. After you have unscrewed t
he coarse/microfilter,
you can lift out the fine filter. Remove any obstructions and
clean the filters under running water.
-Reinsert the fine filter and secure it in place by screwing the
coarse/microfilter tight.
GB
Spray arms
Lime and remnants of food in the washing water can block
the nozzles in the spray arms
mountings.
- Inspect the nozzles in the spray arms for blocked holes due
to remnants of food.
- If necessary, pull the lower arm 10 up wards and take it off.
- Unscrew the upper spray arm 9 .
- Clean both spray arms under running water.
- Refit the spray arms. Ensure that the lower arm has locked
into place and the upper one is screwed tight.
9 and 10 and the arm