Table of Contents
Advertisement
Introduction
About this Guide
About this Guide
Approved Vendor List for Drives
NSS3000 Series Network Storage System Getting Started Guide
This guide provides instructions on how to initially configure your NSS3000. It
describes how to set up the hardware, configure the NSS, and how users can
access the network storage.
If you are purchasing disk drives to install in the NSS, see the Cisco Approved
Vendor List at
www.cisco.com/go/smallbiz
When you select a disk drive, consider the type of RAID levels required to service
your business needs. For example, if you are creating a RAID (versus a JBOD),
make sure that each of the disks used in the array have the same disk capacity.
The RAID is built using the capacity of the smallest disk in the array.
for a list of recommended disk drives.
1
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Network Storage System NSS3000 Series and is the answer not in the manual?