Table of Contents
Advertisement
The volume modification is shown on the
screen with a bar. During this time the unit
cannot be operated.
It is possible to preset certain volume set-
›››
tings and adjustments
page
Silence the unit
●
Turn the volume control anticlockwise
until you see .
●
ALTERNATIVELY: Press the
MUTE
ment button or the
function button
SILENCE
›››
1)
Fig. 3
.
While the unit is in silence, the active media
source is stopped. is displayed on the
screen.
Note
If the basic playback volume of an audio
source has been increased substantially, low-
er the volume before changing to another au-
dio source.
1)
According to version
Operating the function buttons on-
screen
37.
infotain-
Standard representation: view of possi-
Fig. 2
ble function buttons
Standard representation: view of possi-
Fig. 3
ble function buttons
Introduction
The unit is equipped with a touchscreen
›››
Fig. 1
.
3
The active areas of the screen that represent
a function are called "function buttons" and
are used by pressing them briefly on the dis-
play or holding them down. The function but-
tons are represented in the instructions with
the word "function buttons" and the button
symbol
.
- - -
Function buttons start functions or open sub-
menus. The menu currently selected is
shown in the submenus title line
The function buttons that appear deactivated
(in grey) may not be selected at that time.
Summary of the indications and function
buttons
Action and effect
The title line shows the menu selected at
that time and, if applicable, other function
A
›››
buttons
Fig.
2.
Press to open an additional menu
B
Move the cursor around the screen by press-
ing lightly, without resting your finger. Alter-
natively: Press the desired destination on
C
the screen; the cursor will move to this posi-
›››
tion
Fig.
3.
›››
Fig. 2
.
A
›››
Fig.
2.
»
7
Advertisement
Table of Contents
