Table of Contents
Advertisement
Steps
1. Using the alignment posts, place the left speaker and the right speaker on the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Adhere the tape that secures the speaker cable to the palm-rest and keyboard assembly.
4. Place the antenna cables back into place and adhere the tapes that secure them to the palm-rest and keyboard assembly.
Next steps
1. Install the
system
board.
2. Install the
right
fan.
3. Install the
wireless
card.
4. Install the battery.
5. Install the
base
cover.
6. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
heat
sink.
7. Remove the
power-adapter
8. Remove the
I/O
board.
9. Remove the
left fan
and the
After working inside your
Before working inside your
port.
right
fan.
computer.
computer.
Before working inside your
Removing and installing components
51
Advertisement
Table of Contents
