Table of Contents
Advertisement
Steps
1. Place the left fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the left fan with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure the left fan to the palm-rest and keyboard assembly.
4. Connect the left fan cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Removing the right fan
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the right fan and provides a visual representation of the removal procedure.
36
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Advertisement
Table of Contents
