Installing The Power-Adapter Port - Dell Inspiron 14 5420 Service Manual

4. Remove the power-adapter port cable from the routing guide on the palm-rest and keyboard assembly.
5. Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly.

Installing the power-adapter port

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the power-adapter port and provides a visual representation of the installation
procedure.
Steps
1. Place the power-adapter port, along with its cable, into the slot on the palm-rest and keyboard assembly.
2. Route the power-adapter port cable through the routing guide on the palm-rest and keyboard assembly.
3. Adhere the tape that secures the power-adapter port cable to the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Adhere the tape that secures the power-adapter port cable to the system board.
Next steps
1. Install the heat sink.
2. Install the display assembly.
3. Install the base cover.
4. Follow the procedure in
32 Removing and installing components
After working inside your computer.