Brewer Overview; Helpful Hints; Unpacking - Keurig K140 Operator's Manual

Brewer Overview

Helpful Hints

1. Plug the brewer into a mains socket by itself.
If the electric circuit is overloaded with
other appliances, your brewer may not
function properly.
2. For the best tasting gourmet coffee, tea or
hot chocolate, Keurig recommends using
bottled or filtered water.
Water quality varies from place to place.
If you notice an undesirable taste in your
cup of coffee, tea, or hot chocolate (such as
chlorine or other mineral tastes) we
recommend you consider using bottled
water or water from a filtration system.
For best results, carefully follow
manufacturer's instructions when using
any water filtration system.
3. Customise Your Size, Flavour & Brew.
With many varieties of K-Cup
choose from and 3 brew sizes (170 ml (6 oz),
220 ml (8 oz), and 300 ml (10 oz) your
Keurig brewer gives you endless options to
®
customise the size, flavour and brew that's
perfect for you. For a strong, intense cup,
select an Extra Bold K-Cup
30% more ground coffee than regular
varieties) and the brew size that's right for
you. The smaller the brew size, the more
intense the flavour in your cup. The larger
the brew size, the less intense the flavour in
your cup.
4. Remove K-Cup
Please refer to page 7 for brewing
instructions.
5. Brewing into a travel mug.
To brew into a travel mug, simply remove
the Drip Tray Assembly and place the travel
mugon the Drip Tray Base.
6. Descale the brewer regularly.
Please refer to pages 11 and 12 for
instructions.
Unpacking the Brewer
Place the brewer box on a large steady
1.
pods to
surface (such as a table or countertop) or
®
on the floor. Open the box.
Turn the box on its side with front of box
2.
face down.
Reach into the box and grasp the plastic
3.
pod (with up to
® bag that contains the brewer.
pod after use.
®
4
Carefully pull the plastic bag (and
4.
packaging materials) toward you and out
of the box. The brewer will still be encased
in the polyfoam and be on its side.
Remove the top polyfoam packaging
5.
material.
Carefully lift the brewer off of the bottom
6.
polyfoam and place it upright on a flat,
steady surface.
Lift plastic bag off the brewer and
7.
remove the tape.
Record the serial number for this brewer on
8.
page 3 of this guide. The serial number can
be found on the rating label on the back of
the brewer.
We recommend you save all packing
materials in case future shipping of the
product is necessary.
WARNING:
Keep all plastic bags away
from children.