Brewing Hot Water; C Ontrols & Indicators; Auto Off Energy Save Feature - Keurig K140 Operator's Manual

Brewing Hot Water

Your brewer is able to produce hot water for use in cooking, making
soups, porridge, etc. Simply lift and lower the Handle on the brewer
without adding a K-Cup pod. The blue BREW Button will flash.
®
Be sure to have a mug on the Drip Tray Plate and then press the
BREW Button.
SECTION 2
Controls & Indicators

AUTO OFF Energy Save Feature

Your brewer is programmed to turn off after
8
fig.
30 minutes of non-use. When this feature is
enabled, you will see the AUTO OFF Light
illuminated green. (fig. 8)
ADD WATER
To disable the AUTO OFF setting, and keep
DESCALE
your brewer on at all times, press the
HEATING
AUTO OFF button so the green light turns off.
DRAIN BREWER
AUTO OFF
This means your brewer will now remain on
POWER
BREW
until you press the AUTO OFF button again to
PUSH TO BREW
illuminate the light and activate the feature,
or press the POWER Button to turn the
brewer off completely.
9
(LED Control Panel)