Caring For Your Brewer - Keurig Custom Quick Start Manual

Caring for Your Brewer

Regular cleaning keeps your brewer running smoothly.
Always be sure to unplug your brewer and allow it to
cool before cleaning. For detailed brewer cleaning
and descale instructions, videos, and the full Use &
Care Guide, visit support.commercial.keurig.com.
If your brewer has been in storage or hasn't been
used in days, run two hot water brews (no pod
inserted) before brewing your beverage.
Periodically hand-wash the water reservoir
and lid with warm soapy water and rinse clean.
NOTE: Do not dry the inside of the water reservoir with a cloth,
as lint may remain.
CAUTION: Parts are not dishwasher safe.
Entrance Needles
Lift the brewer handle and locate the entrance
needles on the underside of the lid. To clean the
holes in the needles, hold the brewer handle in
the upward position and with your other hand,
carefully insert a straightened paper clip into all
the holes. Gently move it around to loosen any
coffee grounds. Lower the handle completely
and run a cleansing brew two times. Do not
insert a K-Cup® pod.
Exit Needle
Remove the pod holder
assembly and detach the
funnel. Locate the exit
needle on the inside
bottom of the K-Cup®
pod holder. Insert a
straightened paper clip
into the exit needle to
loosen any coffee
grounds.