Zanussi ZWF1650 User Manual page 92

Table of Contents

Advertisement

Available languages

Available languages

2. Press the Change button to select the desired
Language.
Sprache
DEUTCH
Temp.
Spin
Options
Change
Cancel
A
CLOCK
The clock setting permits you to modify/set up the
current time. It is important to keep it updated as the
current END Cycle Time depends on it.
Example:
1. Enter the Menu option and select the Clock
setting.
2. With a short/single time pressure of the Change
button, the time varies minute by minute. With a
continued pressure of the Change button, the
time varies 10 minutes by 10 minutes.
A
Clock
14.45
Set Time
Temp.
Spin
Options
Change
Cancel
A
CONTRAST
The Contrast setting allows you to modify the
optical characteristic of the display.
Example:
1. Enter the Menu option and select the Contrast
setting.
2. Use the Change button to set up the desired
contrast level.
Contrast
Cancel
Temp.
Spin
Options
Change
A
Einstellungen
Temp.
Spin
Options
Change
Cancel
B
B
Clock
14.46
Set Time
Cancel
Temp.
Spin
Options
Change
B
Contrast
Cancel
Temp.
Spin
Options
Change
B
BRIGHTNESS
The Brightness setting allows you to modify the
backlight intensity of the display.
Example:
1. Enter the Menu option and select the
Brightness setting.
2. Use the Change button to set up the desired
brightness level.
Brightness
Temp.
Spin
Options
Change
A
Note:
At the end of the programme if no button is pressed
for approximately 10 minutes the backlight intensity
goes off.
9 START/PAUSE button
This button has 2 functions:
• Start: after you have selected the desired
programme and options, press this button to
start the washing machine. The light close to the
button will stop flashing and remain lit.
If you have selected a delay time option, the
countdown will begin and will be shown on the
display.
• Pause: when you press this button again, the
programme in progress is interrupted. The light
close to the button will start flashing. To restart
the programme, press the button again.
When you PAUSE the cycle, it becomes possible to
open the door if:
The washing machine is not in the heating
phase;
• The level of the water is not high;
92
Brightness
Cancel
Temp.
Spin
Options
Change
B
Cancel

Advertisement

Table of Contents
loading

Table of Contents