Zanussi ZWF1650 User Manual page 89

8 «Options», «Change» and
«Cancel» buttons
Options button allows you to move through the
option icons.
Extra Rinse
No 10.55
Exit
Temp. Spin Options Change
Change button allows you to select/change the
status of the different icons.
Extra Rinse
Yes 10.55
Temp. Spin Options Change Cancel
Cancel button allows you to return to the previous
selection.
COTTON 08.30
CYCLE END AT 10.55
60°C 1400
Temp. Spin Options Change Cancel
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired program and before
depressing the Start/Pause button
By depressing the Options button, all the symbol
icons, allowed for the selected programme will
appear in the display.
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press
Change button. A line will appear below the
selected icon, indicating that the option is set.
To select the other options press again the Options
button and proceed as before.
Once you have completed the selection of the
options, pressing the Cancel button, the selected
icons will remain fixed in the display.
Note: To modify the already chosen option
selections, repeat the previous procedure.
Important! While selecting the option, if you press
the temperature Temp., Spin, or Start/Pause button
, the relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the Wool and Handwash
programmes and Mini 30'. The machine will add 2
rinses for cottons and 1 rinse for synthetics and
delicates.
This option is recommended for people who are
allergic to detergents, and in areas where the water
is very soft.
TIME SAVING: this option can be used for
lightly soiled cotton, synthetic or delicates items in
order to obtain a good washing programme in a
short time.
This option is not avalable with Wool, Handwash
and Mini 30'.
The washing time will be reduced according to the
type of fabric and the selected temperature.
Selecting this option «Short» or «Very Short» will be
shown in the display.
DELAY START: this option makes it possible to
delay the start of the washing programme by 30 min
- 60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in
the display.
Delay Start
No
Temp.
.
You must select this option after you have set the
programme and before you press the Start/Pause
button
You can cancel the delay time at any moment,
before you press the Start/Pause button
If you have already pressed the Start/Pause button
and you wish to cancel the Delay time proceed
as follows:
1. set the washing machine to PAUSE by pressing
the Start/Pause button
2. deselect the Delay Start option, changing the
status;
89
Delay Start
10.55 Start in 30 min
Temp.
Spin Options Change Cancel
.
;
11.25
Spin Cancel
Options Change
.