Door Adjustments - U-Line ADA Series User Manual & Service Manual

USER GUIDE

Door Adjustments

REVERSING THE DOOR
Location of the unit may make it desirable to mount the
door on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
TO REVERSE THE DOOR
Note: When reversing the door, the top hinge
becomes the bottom hinge on the opposite side
of the unit - likewise, the bottom hinge becomes
the top on the other side.
REMOVE DOOR
1. Remove hinge pin from upper hinge using a 1/8" hex
key tool, making sure to steady the door.
Upper Hinge
Plate
2. Let the door tilt forward and lift door from bottom
hinge.
REMOVE HINGES
1. Using a Phillips screwdriver,
remove the 6 screws from
both the upper and lower
hinges and save for later
steps.
Door Adjustments
Hinge Pin
2. With a Phillips screwdriver, remove the bushing screw
and hing pin from the bottom hinge.
Hinge Pin
3. Remove the cam closer from the lower hinge bracket
and save.
4. Using a 5/32" hex key, remove the upper and lower
hinge brackets from the door, saving all components.
5. Remove black plugs from opposite side of door, flip the
upper hinge bracket and reattach the hinge bushing
and screw into place on the opposite side of door
(where
plugs were
removed.)
Hinge Pin
6. Reattach
Bushing
the upper
Upper Hinge
Plate
and lower
hinges
and hinge
Lower Hinge
Plate
brackets
Cam Closer
to the
and screw
opposite
sides.
15
u-line.com
Cam
Closer
Bushing
Screw
Left-Hand Right-Hand
Hinged Door Hinged Door