Door Adjustments - U-Line 1200 Series Quick Start Manual

115 v / 60 hz & 220-240 v / hz
Hide thumbs Also See for 1200 Series:
Table of Contents

Advertisement

QUICK START GUIDE
QUICK START GUIDE
Stainless Steel and black and white models require 2-1/8"
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
Integrated models require 1/4" (6 mm) clearance if
installed next to a wall. Allow for additional space for any
knobs or pulls installed on the integrated panel/frame.
BI SERIES
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 1/4"
(6 mm) to accommodate the handle if the unit is installed
next to a wall.
1/4" Min. (6 mm)
90°
Door Swing
MARINE SERIES
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 3/4"
(19 mm) to accommodate the handle if the unit is
installed next to a wall or similar type of structure.
Wall
1/4" Min.
14-3/8"
15-1/2"
90°
Door Swing
Wall
3/4" (19 mm) Min.
90°
Door Swing

Door Adjustments

DOOR ALIGNMENT AND ADJUSTMENT
ADA15IM Models
Align and adjust the door if it is not level or is not sealing
properly. If the door is not sealed, the unit may not cool
properly, or excessive frost may form in the interior.
Properly aligned, the door's gasket should be
firmly in contact with the cabinet all the way
around the door (no gaps). Carefully examine
the door's gasket to ensure that it is firmly in
contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of
the door.
To align and adjust the door:
1. Loosen (do not remove) top and bottom hinge screws
using a Torx T-25 screwdriver on the top and a 1/4"
socket on the bottom.
2. Align door squarely with cabinet.
3. Make sure gasket is firmly in contact with cabinet all
the way around the door (no gaps).
4. Tighten bottom hinge screws.
5. Tighten top hinge screws.
REVERSING THE DOOR
Location of the unit may make it desirable to mount the
door on the opposite side of the cabinet.
Locate top hinge supplied in literature package. The hinge
hardware and bottom hinge will be removed and
reinstalled on the opposite side of the cabinet.
8
8
u-line.com
u-line.com

Advertisement

Table of Contents
loading

Table of Contents