Charging Battery - Sharper Image 1014342 Manual

CHARGING BATTERY

Note: The Battery Charger will light up when it is
charging the battery and turn off when the
battery is fully charged. Charge time is
approximately 120 minutes.
1. Turn off the drone before charging.
2. Connect the Battery Charger Cable to the
port found on the side of the drone.
3. Connect USB connector to the power source.
Replacing Propellers
1. Pull firmly to remove broken propeller. Replace
with a new one. Push firmly and carefully.
2. Replace propellers by following the diagram on
the right.
3. Each blade spins differently. Blade A1 turns
clockwise and Blade B1 turns counter clockwise.
A1
B1
Printed in China.
Fly+Drive Drone — 5-inch
B1
A1
Connect the Charge
Cable to the Drone
Insert the
Charge Cable
into a power
source
3