Sharper Image 205092 Quick Start Manual

Congratulations on your purchase of the Sharper Image Quad Smart Drone. This Quick Start
Guide will give you a basic idea of what is involved to get started with your drone. If you are new to
flying drones, we strongly recommend you start by reading the full User's Guide included in this
package. Your safety and satisfaction are our prime concerns.
STEP 1: CHARGE THE DRONE BATTERY
1. Charge your drone by connecting the included USB charging cable to the battery wire.
2. Plug the other end into a computer or laptop USB port.
3. The LED on the cable will turn ON while it is charging and turn OFF when it is fully charged.
TIP: Charge time is about 40 minutes.
STEP 2: INSTALL TRANSMITTER BATTERIES
1. Unscrew the battery compartment on the transmitter and open the battery door.
2. Install 3 AAA batteries (not included) according to the correct polarity ("+" or "-").
3. Replace the battery door.
CAUTION: Do not mix old and new batteries, and do not mix disposable/rechargeable batteries as
this may damage the transmitter.
STEP 3: PAIRING THE TRANSMITTER AND DRONE
1. Make sure the transmitter and drone have full battery power.
2. Inspect the flying area to make sure you are away from crowds, trees, airports, etc.
3. Power on the drone by connecting the battery wire to the power supply wire.
QUAD SMART DRONE
Item No. 205092
Quick Start Guide
- 1 -