General Commands - R&S SMW-K555 User Manual

®
R&S SMW-K555
The following chapters describe the commands specific to the Bandwidth Extension
option.
● General
● Alignment

5.1 General commands

The SCONfiguration:BEXTension subsystem contains the commands for configu-
ration of a bandwidth extension setup.
Example: Loading a bandwidth extension setup file
SCONfiguration:BEXTension:SETup:FILE?
// Response: ""
// No file loaded. Load a file with extension *.bwsa, e.g. the file "test_4GHz.bswa".
SCONfiguration:BEXTension:SETup:FILE test_4GHz
// Query if the file is loaded.
SCONfiguration:BEXTension:SETup:FILE?
// Response: "test_4GHz"
SCONfiguration:BEXTension:STATe 1
Commands
:SCONfiguration:BEXTension:SETup:FILE
:SCONfiguration:BEXTension:STATe
:SCONfiguration:BEXTension:SETup:FILE <SetupFile>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.bwsa.
Parameters:
<SetupFile>
Example:
Manual operation:
:SCONfiguration:BEXTension:STATe <State>
Activates bandwidth extension.
Parameters:
<State>
Example:
User Manual 1179.5776.02 ─ 01
commands.................................................................................................41
commands..............................................................................................42
.................................................................................. 41
"<filename>"
Filename or complete file path; file extension can be omitted.
See Example "Loading a bandwidth extension setup file"
on page 41.
See "Setup"
1 | ON | 0 | OFF
*RST:
See Example "Loading a bandwidth extension setup file"
on page 41.
Remote control commands
..........................................................................41
on page 29
0
General commands
41