®
R&S
SMW-K555
4.4 Align setup wizard settings
Access:
1. Load a bandwidth extension setup file.
See
2. Select "Info / Align"".
3. Select "Align Setup"".
The dialog displays information of the setup alignment configuration and provides
access to setup alignment settings.
Settings:
Measurement device
Instrument..................................................................................................................... 38
Alignment
Comment.......................................................................................................................39
Measurement device settings
Provides settings to configure the measurement device that is the source instrument
for alignment. Typically, use a spectrum analyzer for alignment.
Instrument
Selects the instrument for alignment. This instrument is the measurement device.
For alignment, use the R&S FSW signal analyzer.
How to:
Remote command:
n.a.
User Manual 1179.5776.02 ─ 01
"To load a bandwidth extension setup"
settings....................................................................................... 38
Parameters...................................................................................................39
└
Start RF
Frequency.........................................................................................39
└
End RF
Frequency..........................................................................................39
└
Minimum
PEP................................................................................................. 39
└
Maximum
PEP................................................................................................ 39
"To connect a signal analyzer"
Bandwidth Extension settings
Align setup wizard settings
on page 17.
on page 17
38