Setup Info And Alignment Settings - R&S SMW-K555 User Manual

®
R&S SMW-K555
Hostname or IP Address ← Analyzer settings
Displays or sets the hostname or IP address of the vector signal analyzer.
Remote command:
n.a.
Use Coupler
Optimizes RF ports alignment by coupling with a directional coupler.
Activate this setting, if your test setup includes a directional coupler and if you want to
automate the alignment procedure.
Make sure that the output coupling factor
Remote command:
n.a.

4.3 Setup info and alignment settings

Access:
1. Load a bandwidth extension setup file.
See
2. Select "Info / Align"".
The dialog displays information of the setup alignment configuration and provides
access to setup alignment settings.
Settings:
Align Date /
Align
Alignment
Comment.......................................................................................................................37
User Manual 1179.5776.02 ─ 01
"To load a bandwidth extension setup"
Time...........................................................................................................37
Setup....................................................................................................................37
Parameters...................................................................................................37
└ Start RF Frequency.........................................................................................37
└ End RF Frequency..........................................................................................37
└ Minimum PEP................................................................................................. 37
└ Maximum PEP................................................................................................ 37
Bandwidth Extension settings
Setup info and alignment settings
on page 17.
36