Hendi 212172 Manual page 5

Grounding installation
This appliance is classified as protection class
I and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
Main parts of the appliance
1. Handle
2. Baking plates (Upper & lower)
3. RESET button (At the back)
4. Timer (Up to 15mins)
5. Heating indicator (Orange)
6. Temperature control knob, 0°C ~ 220°C (MAX)
7. ON/OFF switch
Preparations before using for the first time
• Unpack the appliance carefully and remove all
protective packaging and wrapping. Make sure
no packaging debris remains on the appliance.
• Keep the packaging if you intend to store your ap-
pliance in the future.
• Check delivery contents for any missing parts
and any possible transport damage. In the event
of damage in transit or missing parts, DO NOT
use the appliance and contact your supplier im-
mediately.
This appliance is fitted with a power cord that has a
grounding wire and grounded plug. The plug must
be plugged into an outlet that is properly installed
and grounded.
1
2
3
4
5
• Place the appliance on a horizontal, stable and
heat resistant surface. Leave at least 20 cm of
space around and above the appliance.
• Let the appliance heat up for few minutes at the
highest temperature setting (--> Operation) to
remove all residues from the manufacturing pro-
cess. It may also emit some odour for the first
few cycles. This is normal and does not lead to
defect or hazard.
• Let the appliance cool down completely before
cleaning to use it again.
6 7
EN
5