Safety - Kenwood CS-3025 Instruction Manual

Symbol in T h i s Manual
This symbol indicates where applicable cautionary or other imformation is to be found.
Power Source
T h i s equipment operates from a power source that does not apply more than 2 5 0 V rms
between the supply conductors or between either supply conductor and ground. A pro-
tective ground connection by w a y of the grounding conductor in the power cord is essen-
tial for safe operation.
Grounding the Product
This equipment is grounded through the grounding conductor of the power cord. T o avoid
electrical shock, plug the power cord into a properly wired receptacle before connecting
to the equipment input or output terminals.
Use the Proper Power Cord
Use only the power cord and connector specified for your product.
Use the Proper Fuse
T o avoid fire hazard, use a fuse of the correct type.
Do not Operate in Explosive Atmospheres
T o avoid explosion, do not operate this product in an explosive atmosphere.
Do not Remove Cover or Pane!
T o avoid personal injury, do not remove the cover or panel. Refer servicing to qualified
personnel.
Voltage Conversion
If the power source is not applied to your product, contact your dealer. T o avoid electrical
shock, do not perform the voltage conversion.
2

SAFETY