Table of Contents
Advertisement
Cooktop
Oven Control Features
1.
Up / Down arrows - Use to adjust and set the
appliance's timer functionality.
2.
Timer on-off - Use to set or cancel the minute
timer. The minute timer does not start or stop
any cooking function.
3. Oven temp knob - Use to select the desired
cooking temperature.
4. Oven indicator light - Glows each time the oven
cycles on to maintain the set oven temperature.
5. Oven light - Use this switch to turn the internal
oven light on or off.
6. Bake - Use to enter the normal baking mode
temperature and start a normal baking function.
7.
Broil - Use to set the broil function.
8. Keep Warm- Use with foods that are already
cooked to keep them at serving temperatures.
9. Conv bake - Use to select convection baking,
which is used to obtain the best culinary results
when baking with multiple pans and racks at
any temperature.
10. Conv broil - Use to select the convection broil
function, best for thicker cuts of meat, fish and
poultry. Convection broiling gently browns the
exterior and seals in the juices
Hot Surface
SETTING OVEN CONTROLS
Operating the Oven Light
Press the oven light switch
located on the control panel to
turn the interior oven light on
and off. The light is located in
the rear of the oven interior. To
replace the interior oven light,
see
"Replacing the Oven Light"
on page 28
Setting the Time
You must set the time before you operate the oven.
When you connect the appliance to the electrical
supply or after a power outage, the display flashes
automatically.
To set the time:
1.
Press timer on-off. The timer activate symbol
will come on.
2. Use
and
day. After approximately five seconds, the flash-
ing stops and the display shows the time of day
you set.
To change the time:
1.
When the appliance is active, press and hold
and at
2. When the dot between the hour and minutes
flashes, use
time.
Oven
Figure 11: Oven
light switch
to set the correct time of
the same time.
and
to set the new
13
Advertisement
Table of Contents
