Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com
Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com
1
DESCRIPTION
The Viking Model VXD Deluge Valve is a flood valve with one moving mechanism.
The Deluge Valve is used to control water flow in Deluge and Preaction sprinkler
systems. The valve is held closed by system water pressure trapped in the priming
chamber, keeping the outlet chamber and system piping dry. In fire conditions, when
the releasing system operates, pressure is released from the priming chamber. The
Deluge Valve diaphragm opens to allow water to flow into the system piping.
Features
1. Field replaceable diaphragm
2. Designed for installation in horizontal or vertical position
3. Automatically resets without opening the valve
4. Compatible with Hydraulic, Pneumatic and Electric Release Systems
2
LISTINGS AND APPROVALS:
cULus Listed: Guide No. VLFT and VLFT7
FM Approved: Deluge Sprinkler Systems, Preaction Sprinkler Systems, Refrigerated Area
Sprinkler Systems
3
TECHNICAL DATA
Specifications:
Pressure Rating: 250 psi (17.2 bar)
Installation Position: Vertical or Horizontal
Operating Temperature Range: 39 to 140 ºF (4 to 60 ºC)
Priming chamber supply restriction (required): 1/8" (3 mm)
Material Standards:
Table 1: Ordering Information and Technical Data for Model VXD Valves
Nominal
Groove/
Size
Groove
1-1/2
23310
2
23311
21/2
23312
3
23313
4
23316
6
23319
8
23322
10
23325
1.
Expressed in equivalent length of pipe based on Hazen & Williams Formula. C-120.
Trim and Accessories
Trim Packages are available for the Model VXD Deluge Valve in several configurations (Refer to the applicable document for
the desired system type for more information). The configurations are available pre-trimmed or loose. Additional accessories
are available and may be required for system operation or supervision. Refer to the system description and technical data for
complete operating trim requirements for the desired system.
Form No. F_012120 21.10.163 Rev 21.1
TECHNICAL DATA
The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058
Refer to Figure 3
Part Number
Flange/Flange
Flange/Flange
(ANSI 150)
(PN16)
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
23314
23315
23317
23318
23320
23321
23323
23324
23326
23327
Friction
C v Factor
1
Loss
11
53
21
74
14
142
24
189
56
255
52
754
86
1232
107
1991
Replaces Form No. F_012120 Rev 20.2
Page 1 of 13
DELUGE VALVE
MODEL VXD
Shipping Weight
Grooved
Flanged
Lbs.
kg
Lbs.
7
3.1
--
10
4.5
--
22
10
--
28
13
47
60
27
81
97
44
128
167
76
207
396
180
470
(Added over-torquing note.)
kg
--
--
--
21
37
58
94
214