Haier HSU-07RE03/R2 Operating Manual page 8

Operation
Auto run, Fan operation
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press, operation
mode changes as follows:
AUTO COOL DRY
Unit will run in selected mode.
Stop display at " " AUTO or "
(3) FAN
Press FAN button. For each press, fan speed changes
as follows:
AUTO LO
Unit will run at selected fan speed.
Note:AUTO is not available in FAN mode.
Hints
Remote controller can memorize settings in each operation mode. To run it next time just
select the operation mode and it will start with the previous setting.
No reelecting is needed.(TIMER ON/OFF needs reelecting)
Cautions:
On cooling only unit, heating mode is not available,
After replacing batteries, press ON/OFF, and display
becomes as follows:
Operation mode: AUTO, Temp. No
Timer mode: No, Fan speed :AUTO
Enjoy yourself by just a gentle press.
HEAT FAN
"FAN.
MED HI
7
AM
ON/OFF TEMP
1
4
MODE
SET
2
FAN
TIMER
3
SWING CLOCK
SLEEP
HEALTH
LOCK
RESET
(4) Unit stop
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closed automatically.
Note:
The above information is the
explanation of the displayed
information therefore varies
with those displayed in actual
operation.