Table of Contents
Advertisement
WIFI front panel LED call-outs
rNDC front panel LED call-outs
NOTE:
rNDC port LED behavior can be found in their respective datasheets.
Table 4. Expansion card LEDs
LED
rNDC, WIFI, BLE card system status LEDs
rNDC, WIFI, BLE card temperature status LED
WIFI operating modes
BLE operating modes
Pre-requisites
NOTE:
For detailed installation instructions, see
The following is a list of components required for successful platform installation:
•
VEP4600 platform
•
AC country- and regional-specific cables to connect the AC power source to each of the platforms' AC power supplies
•
Two-post rail kit mounting brackets for rack installation, included
•
Screws for rack installation
•
#1 and #2 Phillips screwdrivers, not included
•
M2 Philips drive flat head screwdriver, not included
•
Ground cable screws (included) for L-bracket—order separately
•
M3 ground lug assembly kit screw, depending on your platform
Description
•
Off—Card is off
•
Solid green—Normal operation
•
Solid yellow—Citical card error
•
Flashing green—Booting
•
Flashing yellow—Noncritical card error
•
Off—Card is off
•
Solid green—Normal temperature operation
•
Solid yellow—Temperature is at the limit
•
Flashing yellow—Temperature is over the limit
•
Solid green - radio is on
•
Off—radio is off
•
Solid green - radio is on
•
Off—radio is off
Site preparations
and
VEP4600
installation.
VEP4600 platform
11
Advertisement
Table of Contents
