Table of Contents
Advertisement
LED
LOCATOR LED/System Beacon
Temperature status LED
RJ-45 Ethernet LED
Table 2. System management Ethernet port LEDs
LED
Link LED
Activity LED
Table 3. SFP+ port LEDs
LED
Link/Activity LED
Expansion card LED behavior
Both system and temperature LEDs are dual-color, green and amber. The right LEDs are green only.
There are four LEDs on the WIFI front panel:
1. System LED
2. Temperature LED
3. WIFI operating mode LED
4. BLE (Bluetooth Low Energy) LED
10
VEP4600 platform
Description
•
Flashing yellow—PSU warning event; power continues to
operate
•
Off—Locator function disabled
•
FFlashing blue with 1 sec on and 1 sec off – Locator function
enabled
•
Flashing blue with 2 sec on and 1 sec off – system in standby
•
Off - system off or in standby
•
Solid green—temperature is normal
•
Solid yellow—temperature is at the limit
•
Flashing yellow—temperature is over the limit
•
Off—no link and no activity detected
•
On—Activity on the port
•
Solid yellow—Link operating at a lower speed
•
Solid green—Link operating at a maximum speed—1G
•
Flashing green—Port activity
Description
•
Off—No link
•
Solid green—Link operating at a maximum speed,
autonegotiated/forced or 1G
•
Solid yellow—Link operating at a lower speed, autonegotiated/
forced or 10/100M
•
Off—No link
•
Flashing green—Port activity
Description
•
Off—No link
•
Solid green—Link operating at maximum speed, 10G
•
Solid yellow—Link operating at a lower speed, 1G
•
Flashing green—port activity for 10G
•
Flashing yellow—port activity for 1G
Advertisement
Table of Contents
