Peterbilt 365 Manual page 237

Electrical loads shut off by LVD
• Cab dome lamps
• Cab accessories
• Spare LVD wiring for customer
added accessories
WARNING
DO NOT use the Spare Battery A and
B circuits or other circuits that are con-
trolled by the LVD to power electronic
engine controls, ABS circuits, or safe-
ty/work related lighting. Before adding
any device to the vehicle's electrical
system, consult your nearest author-
ized dealer or read the contents of
TMC RP136. Failure to do so may
cause equipment damage or lead to
personal injury.
NOTE
The determination of what circuits/
loads that were connected to the LVD
was based upon the recommendation
from Technology and Maintenance
Council (TMC) of the American Truck-
Y53-6076-1D1 (09/20)
ing Association. To review the recom-
mended practice, see TMC RP-136.
NOTE
All LVD circuits are color-coded blue
on the central electrical panel cover la-
bel.
Vehicle Light Bulb specifications
Bulb Type of Notes
Location Bulb
Low beam H11-LL (Long life
halogen (SAE), H7 version not
(ECE) required)
Low beam D1-S
HID
High beam HB3A – (Long life
halogen LL version not
required)
Daytime 4157K N/A
running lamp/ (SAE),
position lamp/ 3157K
turn signal/ (ECE)
MAINTENANCE - Electrical System
Bulb Type of Notes
Location Bulb
halogen side
marker lamp
Aiming Headlights
The headlights were properly aimed at the
factory to meet safety specifications. If the
headlights need to be adjusted, please
have an authorized dealership aim the
headlights.
How to Change the Headlight
This procedure applies to headlight pods
that are mounted to the side of the hood.
WARNING
Optional HID headlights have high
voltage circuits and should only be
serviced by a trained technician. At-
tempting to service the HID ballast
without proper training may result in
severe electrical shock which could
lead to death or personal injury.
5
235