Connecting Other Devices; Connecting An External Power Amplifier; Connecting Recording Devices - Yamaha HTR-7065 Owner's Manual

1 2 3 4 5 6 7
Other connections
7

Connecting other devices

Connecting an external power amplifier

(HTR-7065 only)
When connecting an external power amplifier (pre-main amplifier) to enhance speaker
output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit.
The same channel signals are output from the PRE OUT jacks as from their
corresponding SPEAKERS terminals.
Caution
• To prevent the generation of loud noises or abnormal sounds, make sure the followings before making
connections.
– Remove the power cable of the unit and turn off the external power amplifier before connecting them.
– When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS
terminals.
– When using an external amplifier that does not have the volume control bypass, do not connect other
devices (except the unit) to the amplifier.
The unit (rear)
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
HDMI OUT
(BD/DVD)
2
C
SPEAKERS
ANTENNA
FRONT CENTER SURROUND
(RADIO) COMPONENT
VIDEO
AM FM REMOTE
IN
P R
OUT
P
B VIDEO
Y
12V 0.1A
MONITOR OUT
TRIGGER OUT
SINGLE
FRONT SURROUND SUR. BACK
AV AUDIO ZONE 2
OUT OUT OUT PRE OUT
AV 5 AV 6 AUDIO 1 AUDIO 2
1 2 3 4
1
FRONT jacks
Output front channel sounds.
2
SURROUND jacks
Output surround channel sounds.
3
SUR. BACK jacks
Output surround back channel sounds. When using only one external amplifier for the surround
back channel, connect it to the SINGLE jack (L side).
8 9 10
SURROUND BACK/BI AMP ZONE 2/PRESENCE
SINGLE
EXTRA SP
CENTER
1 SUBWOOFER 2
5
4
SUBWOOFER1–2 jacks
For connecting a subwoofer with built-in amplifier. When 2 subwoofers are connected, the same
sound is output from them.
5
CENTER jack
Outputs center channel sounds.

Connecting recording devices

You can connect video/audio recording devices to the AV OUT and AUDIO OUT jacks.
These jacks output analog video/audio signals selected as the input.
• To copy video/audio from a video device, connect the video device to the AV 5–6 jacks of the unit.
• To copy audio from an audio device, connect the audio device to the AV 5–6 jacks or AUDIO 1–2 jacks of
the unit.
• Be sure to use the AV OUT and AUDIO OUT jacks only for connecting recording devices.
AV OUT jacks
The unit (rear)
V
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
HDMI OUT (BD/DVD)
1 2
ARC
L
ANTENNA FRONT CENTE
(RADIO) COMPONENT
VIDEO
AM FM REMOTE
IN
P R
R
OUT
P B VIDEO
VIDEO
AV
OUT
Y
12V 0.1A
MONITOR OUT
TRIGGER OUT
COAXIAL OPTICAL
AV AUDIO ZONE 2
(TV)
OUT
OUT OUT
AV 3 AV 4 AV 5 AV 6 AUDIO 1 AUDIO 2
L
R
AUDIO
OUT
AUDIO OUT jacks
PREPARATIONS ➤ Connecting other devices
Video/audio input
VIDEO
V
L
L
R
Video recording
R
device
AUDIO
L
L
Audio recording
R
device
R
AUDIO
Audio input
33
En