Yamaha HTR-7065 Owner's Manual page 143

Controlling the unit from a web browser (web control)
You can control the unit with the web control screen displayed in a web browser.
Web browser
Web control Web control
PC Router
• To use this function, the unit and your PC must be connected to the network properly.
• Some security software installed on your PC may block the access of the unit to your PC. In these
cases, configure the security software appropriately.
• To display the web control screen or turn on the unit from the web control when the unit is in standby
mode, set "Network Standby" (p.3) to "On".
• We recommend using one of the following web browsers.
– Internet Explorer 7.x, 8.x or 9.x
– Safari 5.x
1
Start the web browser.
2
Enter the IP address of the unit in the address bar of the web
browser.
(Example)
• You can check the IP address of the unit in "Network" in the "Information" menu.
• You can bookmark the unit's IP address in the browser or create a shortcut link (p.3) to access the
web control screen quickly in the future.
The unit
Supplement for Web Control
Note
• If you are using a DHCP server, the IP address of the unit may change each time the unit is turned on.
• If you have enabled the MAC address filter, you need to specify the MAC address of your PC to allow
the PC to access the unit. For information on how to check the MAC address of your PC, refer to its
instruction manual.
• Items available on the web control screen vary depending on the model.
1
En